Band saw FMB PEGASUS+VHZ

Popis produktu

Semiautomatic band saw machine to cut from 0° to 60°. Head structure in 3 parts: special aluminium alloy, steel and cast iron. Dynamometric blade tensioning. Broken blade micro. Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing. Blade cleaning brush driven by motor gearbox.

DTI “interrupted cut device” installed as standard equipment.Blade guide with combined action of side bearings, carbide plates and top bearing. Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. Connection of the motor wheel to a flange with two conical bearings. 16÷120 m/min VHZ electronical blade speed regulation for a wide range of blade speed selection. Material clamping vice with rack system, manual positioning and hydraulic stop cylinder. Ergonomic working table and control panel. Head rotation angle stop at 0°,45° and 60°. Graduated scale for angle reading and rugged in construction locking lever. Two-rolled roller table for supporting material loading side placed on the basement. Heavy duty machine base, sheet metal construction, raised sides for chips & coolant containment.  Housing the coolant pump & 80L capacity tank, plus the Hydraulic pump unit for bow cylinder movement, vice cylinder. Electrical cabinet with 24VAC, main switch and electric drives. Blade speed analogic regulator. Total protection against highest voltage and short circuit current. Protection level IP 55. Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph - 230V/50Hz/3Ph - 220V/60Hz/1Ph - 220V/60Hz/3Ph - 440V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7036.

Technical parameters:

Cutting capacity:

Cutting angle
0°	330 mm	300x300 mm	330x510 mm	330x510 mm
45°=>>	330 mm	330x330 mm	190x360 mm	330x330 mm
60°=>>	240 mm	160x160 mm	160x230 mm	160x230 mm
<<= 45°	-	-	-	-
<<= 60°	-	-	-	-