Metal lathe OPTIturn TH 5620 D

Popis produktu

Machine Description:

• Spindle clamping Camlock DIN ISO 702-2 No. 8
• Hardened and ground spindle mounted in adjustable tapered roller bearings running in an oil bath
• Guaranteed spindle face runout <0.015 mm
• Enclosed quick-change slide housing, all gears and shafts hardened and ground running in oil bath
• Machine base and bed cast in one piece of cast iron
• Removable bed bridge
• Hardened and ground bed guide surfaces
• Central lubrication of the guide surfaces
• Stop rod with four cams for switching off the longitudinal feed
• Tailstock adjustable by ±13 mm
• Right-left travel switchable by control lever directly on the slide
• Underfuse switch, emergency switch and motor protection
• Mechanical spindle foot brake
• Design according to DIN 8606 (precision tooling)
• Digital measuring of all three axes using glass rulers
• Chuck "Made in Czech Republic - the lathe is equipped with a 3-part chuck made in the Czech Republic by TOS Svitavy

Standard accessories (included in the package):

• 3-jaw chuck Ø 315 mm
• Fixed lunette for Ø 19 - 165 mm
• Movable lunette for Ø 16 - 95 mm
• Cooling device
• Focusing wall
• Spindle brake
• Holder for square blades D 32×150 mm
• Threaded indicator
• Quick-release knife holder SWH 7-C
• Reducing sleeve MK7/MK5
• Fixed tip MK5 - 2 pcs
• Halogen flashlight 50 W/24 V
• Tool case
• Oil cartridge
• Digital position measurement DPA 21

TECHNICAL DATA:

• Tip height: 280 mm
• Max. turning diameter over bearing: 560 mm
• Max. turning diameter above the caliper: 355 mm
• Max. turning diameter without bridge: 790 mm
• Bed width: 350 mm
• Distance between tines: 2000m
• Bridge length: 270 mm
• Spindle taper: MK7
• Spindle clamping: Camlock DIN ISO 702-2 No. 8
• Speed: 25 - 1600 rpm
• Continuous speed change: No
• Speed - Vario version: 10 - 2500 rpm
• Number of gears: 12
• Spindle clearance: 80 mm
• Pinola travel: 180 mm
• Pinole taper: MK5
• Longitudinal travel: 0,059 -1,646 mm/rev. (35 )
• Transverse travel: 0,020 -0,573 mm/rev. (35 )
• Max. knife slide: 130 mm
• Max. travel of the cross slide: 316 mm
• Thread metric: 0,2 - 14 mm/rev. (47 )
• Inch thread: 2 - 112 threads/1" (60 )
• Trapezoidal thread: 4 -112 D.P. (50 )
• Modular thread: 0,1 -7 M.P. (34 )
• Cooling pump motor power: 100 W
• Power input: 7500 W
• Electrical connection: 400 V
• Machine weight: 2720 kg
• Machine dimensions: 3340x1460x1150 mm (WxHxD)