Circular saw MEP TIGER 352 NC 5.0

Popis produktu

TIGER 352 NC 5.0, electro-pneumatic automatic vertical sawing machine which can operate also in semi-auto- matic mode, to cut from 60° left to 45° right, with HSS blade.

-CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

• 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time
• Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
• Registration of alarms and events with the possibility to visualize the story of occurred events.
• Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).
• Optimization of the torque in two ranges ( 12÷40 and 36÷120 rpm ) combining the inverter features with the mechanical gear change (OPTIONAL 15÷50 and 45÷150 rpm with 3,0 kw motor and 5,5 kw inverter).
• Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
• Double set of gears to obtain a high performance.
• Sawing head movement on double linear guides with preloaded slides with recirculating ballscrews.
• Coaxial cylinder with bypass valve for fast approach and linear transducer for head position reading.
• Cutting head and feeding vice positioning with joystick
• Automatic acquisition of the actual starting point of the cut
• Shearing stress control.
• Rotating table on a center pin with axial bearing which allows higher precision on the cutting angle set.
• Pneumatic vertical vice.
• Electric pump for the blade lubrication and cooling.
• Wire chip brush for band cleaning.
• Indicator with flashing light in case cycle is stopped.
• HSS blade Ø 350x32x2.5 for solids or sections.
• Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard-delivered traditio- nal lubrication with emulsible oil.
• Service keys and instructions manual for maintenance and spare parts list.

FEATURED SPECIFICATIONS: