Band saw MEP SHARK 652 SXI H 5.0

Semi-automatic band saw MEP SHARK 652 SXI H5.0 with maximum cutting capacity Ø 450mm, 650x450mm (profile). Frequency inverter 15 to 150 m/min. Adjustable angle cuts from -60° to +60°. Power consumption 9.3 KW.

Product code: SHARK 652 SXI H 5.0

Price on request

out of stock

This product can be obtained on the basis of a non-binding inquiry. After sending your inquiry, we will prepare an individual price offer with the earliest possible delivery date.

Popis Výrobce Diskuze Recenze Příslušenství Náhradní díly

Band saw MEP SHARK 652 SXI H 5.0

out of stock

Popis produktu

SHARK 652 SXI H 5.0, dual column electro-hydraulic band saw, equipped with blade 6700x41x1,3mm specifically designed to cut pipes and beams up to max 650x450mm at 0° and can miter from +60° up to -60°.

The machine is available in two versions both equipped with a simple touchscreen and the latest MEP controller which is designed exclusively for all our sawing machines.

– MANUAL POSITIONING (manual rotation of the head with a hand lever and a hydraulic brake to lock the head into position; the cutting angle is visualized on a display).

– AUTOMATIC POSITIONING (programming of the cutting angle from the electrical panel with automatic hydraulic locking system).

In the AUTOMATIC POSITIONING feature the cutting angle is determined by means of a gear/chain system and 2 cutting cycles are available.

A) AUTOMATIC CYCLE for cuts only at one angle

B) AUTOMATIC CYCLE for cuts with 2 angles programmed to be initiated alternatively.

To make the angle setting easier both versions A and B can be equipped with a pair of pop-up hydraulic rollers (one for the infeed and one for the outfeed). This avoids the material scraping onto the turn table when mitiring (OPTIONAL).

A FEW FEATURES:

Structure in sturdy cast iron, to absorb vibrations and give the machine a better cutting stability and longer blade life.
Powerful 9,3kw (15hp) blade motor with vectorial inverter in order to continuously adjust the blade speed in a single range from 15 to 150m/min.
Powerful coolant flows to wash the cutting area and to convey chips away.
Work light and laser projector to position the bar accurately in order to carry out non-standard or facing cuts.
Saw head stroke by means of double hydraulic cylinders on linear guides with ball-bearings and pre-loaded slides (3° canted head to make the chip removal easier for horizontal walls).
Self-adjustment cutting force by means of a servo valve mounted on the hydraulic cylinder.
Latest generation hydraulic control unit, with high efficiency and low energy consumption.
7 “ touch screen which visualizes.
Two hydraulic cutting vises to clamp the material on both sides and one vertical hydraulic cylinder.
Automatic adjustment of the front guide arm in relation to the capacity that needs to be cut.
Adjustable blade-guide heads in steel, with roller and carbide pads.
Servo control to shift idler pulley for blade changing (2200 kg).
Three coolant pumps to ensure high coolant flood (120 l/min) to cool down the blade and wash away chips from the working area.
Powered blade brush.
Belt chip conveyor ( Optional).
Machine can be handled with both lift truck and crane.
BI-METAL band saw blade included.