Band saw MEP SHARK 281 CCS

Gravity band saw MEP SHARK 281 CCS with maximum cutting capacity Ø 250mm (log), 280x200mm (profile). 2 cutting speeds 36 and 72 m/min. Adjustable angle cuts from 0° to +60°. Power consumption 1.5 / 1.8 KW.

Product code: 472.0063

Price on request

out of stock

This product can be obtained on the basis of a non-binding inquiry. After sending your inquiry, we will prepare an individual price offer with the earliest possible delivery date.

Popis Výrobce Diskuze Recenze Příslušenství Náhradní díly

Band saw MEP SHARK 281 CCS

out of stock

Popis produktu

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control).

A FEW FEATURES:

Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle.
Vice with fast clamping device.
Hydraulic transducer to visualize band tensioning.
Electric pump for band lubrication and cooling.
Wire chip brush for band cleaning.
Double head return spring.
Adjustable rod to measure stop to make cuts of the same length with millimetred steel rod.
Stock support arm with roller predisposed to mount loading table.
Bi-metal band for solids and sections.
Service keys and instructions manual for maintenance and spare parts list.
The CUT CONTROL SYSTEM (CCS) can be retrofitted on machines out in the field.