Description:

Manual bandsaw for degree cuts from 0° to 60° right. Head stucture made of cast iron. Hydrauilic transducer which shows the stretching blade level, and handle with control button. Blade guide with combined action of side bearings,cabide plates and top bearing. Assisted cutting modality: thanks to an hydraulic cylindrical brake which controls the gravity lowing down movement; once the cut has been done, the head has to be lifted up by hand from the operator. Manual clamping vice equipped with a quick-locking system of the piece. Mechanical locks at 0° and 60° for the head rotation and graduated measure reading system with a strong locking lever. Measuring rod with milimetric indication and turnable lenght stop.Cooling tank installed on the higher part of the basement with release nozzle and electrical pump for refrigeration of both blade guides. Electrical cabinet with auxiliary tension of 24VAC, main switch and user controls.High elctrical protection and safety . Feeding power tension: 400V/50Hz/3Ph. Colours: RAL 1018 yellow-RAL 7036 grey.

TECHNICAL PARAMETERS:

CUTTING CAPACITY:

cutting angle
0°	220 mm	210×210 mm	120×250 mm	—
45°=>>	150 mm	145×145 mm	145×145 mm	—
60°=>>	90 mm	85x85 mm	85x85 mm	—
<<= 45°	—	—	—	—
<<= 60°	—	—	—	—