Band saw PILOUS ARG 300 plus E

Description

The universal band saw is expected to find application in many areas from facilities with non-stop operation to metalworking and maintenance workshops. It is equipped with an industrial saw band 27 x 0.9 mm, manufactured in many versions, which allows for cutting of a wide range of materials, including stainless steel or tool steel. The band saw arm uplift is manual; the feed into cut is carried out by the weight of the arm, with the possibility of continuous fine adjustment by oil damper butterfly valve. When the cut is finished, the band saw drive automatically switches off. 
The vice system also makes the machine highly versatile, enabling continuous adjustment of the cutting angle on both sides within the range of 60° to the right and 45° to the left. The turntable rotates with the saw belt. This prevents the saw blade from cutting into the loading surface of the vice. To facilitate easy arm uplift the machine is equipped with adjustable tension springs that allow for setting of optimum force required for the arm uplift according to characteristics of the material to be cut.

Specifications:

• Robust machine framework composes of castings from grey cast iron and therefore ensures vibration absorption.
• Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts.
• Simple locking and adjusting of the desired cutting angle on the angle scale with stops fixed at 45°, 60° and 90°.
• Massive quick-clamping vice ensures easy and reliable material clamping.
• Large diameter running wheels and precise three-side hardmetal guiding ensure long service life of the band and cutting accuracy.
• Overdesign of running wheel bearings, tensioning wheel system and all rotary parts ensures long service life of the machine.
• Noiseless and maintenance-free band drive is provided by an industrial electric motor with worm gearbox.
• Three-phase two-speed motor (400 V) allows for the selection of band speed between 40 and 80 m/min.
• The machine is connected to a complete cooling system with a high-performance pump and possibility of regulating the flow on both guiding heads independently. Coolant tank with a pump is placed in the base of the machine.
• Easy control by ergonomically placed controls (electrical and hydraulics) on the base of the machine.
• The machine is equipped with a 250 mm workpiece stop.

Technical parameters:

Cutting capacity:

Cutting angle
0°	300 mm	290x290 mm	360x190 mm	-
45°=>>	240 mm	190x190 mm	240x160 mm	-
60°=>>	155 mm	150x150 mm	150x150 mm	-
<<= 45°	220 mm	190x190 mm	240x100 mm	-
<<= 60°	-	-	-	-